Another sensor for the collection – it is a BMP388 by Bosch Sensortec, so lets crack on and try this out with a Micro:bit again On with the manufacturers information …
-
-
In this article we look at yet another humidity and temperature sensor from TI – this time its the HDC2080 which we will connect up to a Micro:bit Lets look …
-
Arduino
Micro:bit and BH1745NUC Luminance and Colour Sensor example using the Arduino IDE
by shedboy71In this article we look at a BH1745NUC Luminance and Colour Sensor and connect it to a Micro:bit Lets have a look at the sensor The BH1745NUC is digital color …
-
In this article we look at a digital geomagnetic sensor – this time its the BMM150. We will connect this to a micro:bit and use the Arduino IDE for development …
-
In this example we will connect a MMA8452Q accelerometer to a Microbit – we will be using the Arduino IDE Lets look at some information about the sensor The MMA8452Q is a …
-
This 16-bit I/O expander for the two-line bidirectional bus (I2C) is designed for 2.5-V to 5.5-V VCC operation. The PCF8575 device provides general-purpose remote I/O expansion for most microcontroller families …
-
The LM75 temperature sensor includes a delta-sigma analog-to-digital converter, and a digital overtemperature detector. The host can query the LM75 through its I²C interface to read temperature at any time. …
-
The GY-21P is an interesting module in that it combines a BMP280 sensor and an SI7021 sensor. The on-board BMP280+SI7021 sensor measures atmospheric pressure from 30kPa to 110kPa as well …
-
In this article we will look at some add-on boards for the Micro:bit. The Micro:bit is a terrific development board which has 25 individually-programmable LEDs, buttons , accelerometer, compass and …